Before applying Vinyl & Trim, it's important to clean and dry your boat's surface. Doing so ensures best results and the optimum bond with your protective coating. We recommend SKWOL™ Wash & Prep, which was specially formulated with active ingredients made to accept the longest-lasting covalent bond with Vinyl & Trim.

Once boat seats have been cleaned and dried, spray Vinyl & Trim in a misting fashion - working in small sections at a time. Product can be layered once dry for further protection as desired.

For mold & mildew spotting, gently agitate the surface with a bristle brush (begin with a soft bristle brush such as a detailing brush, for lighter spotting. For more significant spotting, a more corse brush may be necessary. Always use caution when agitating vinyl upholstery, as applying too much pressure may be harmful.) Allow product to remain on the surface for up to 30 minutes. Reapply, and wipe clean. Repeat as necessary.

With a clean, dry microfiber cloth, wipe the surface clean (Do not apply significant pressure) * NOTE: For best results, allow to dry 24 hours before rain is to be expected or before washing.